Repair and Service of Tektronix TDS8200 Digital Sampling Oscilloscope

At Wyoming Electronics Inc, we are proud to offer comprehensive repair and servicing solutions for the Tektronix TDS8200 Digital Sampling Oscilloscope. Our team of highly skilled technicians specializes in addressing issues and ensuring the optimal performance of this advanced instrument.

When you entrust your Tektronix TDS8200 oscilloscope to us, here is an overview of how we handle the repair and service process:

1. Initial Assessment: Upon receiving your oscilloscope, our technicians conduct a thorough assessment to evaluate its physical condition and overall functionality. We carefully inspect the exterior for any signs of damage, assess the connectors and cables for proper connections, and examine the performance of the instrument.
2. Troubleshooting and Diagnostics: If your oscilloscope is experiencing any malfunctions or performance issues, our technicians employ advanced troubleshooting techniques. With their extensive knowledge and expertise, they identify and diagnose the root causes of the problems, utilizing specialized equipment and following Tektronix’s recommended procedures.
3. Component Replacement: Once the faulty components or subsystems are identified, we proceed to replace them with genuine Tektronix parts. We source these components from authorized suppliers to ensure compatibility and maintain the instrument’s original performance specifications. Our technicians have experience in handling delicate electronic components to ensure precise and accurate replacements.
4. Calibration and Adjustment: After replacing the faulty components, we meticulously calibrate and adjust your Tektronix TDS8200 oscilloscope. We use high-precision test equipment and software tools to align the instrument’s measurements and readings with known reference signals. This step ensures accurate and reliable performance.
5. Firmware and Software Updates: As part of our comprehensive service, we check for available firmware and software updates provided by Tektronix. If applicable, we update the oscilloscope’s firmware to the latest version, incorporating any enhancements, bug fixes, and stability improvements provided by the manufacturer.
6. Rigorous Testing: Before returning your oscilloscope to you, we subject it to rigorous testing procedures to validate its performance. Our technicians verify the accuracy of measurements across various signal frequencies, thoroughly test all features and controls, and ensure that the instrument meets specified tolerances.
7. Cleaning and Maintenance: We understand the importance of a clean and well-maintained instrument. As a final step, we meticulously clean your Tektronix TDS8200 oscilloscope, removing dust, debris, and contaminants that may have accumulated during usage. This cleaning process helps prolong the lifespan of your instrument and ensures optimal performance.
8. Detailed Service Report: Along with your serviced oscilloscope, we provide a detailed service report. This report outlines the repairs performed, components replaced, calibration results, and any additional observations or recommendations made during the service process. It serves as a valuable reference and documentation for your records.

Steps to getting your TDS8200 fixed:
1) Fill our RMA form here, and ship us your defective TDS8200
2) We will perform free evaluation and quote you with lead time
3) You will accept or decline the repair
4) We will repair and or return your TDS8200

At Wyoming Electronics Inc, we are committed to providing exceptional repair and service solutions for the Tektronix TDS8200 Digital Sampling Oscilloscope. With our expertise, attention to detail, and adherence to Tektronix’s guidelines, you can trust us to restore your instrument to its optimal working condition.

Key Features
The TDS8200 Series instruments are high-speed, precision sampling systems that find use in validation and conformance testing and impedance verification for:
High-performance semiconductor/computer applications, such as semiconductor testing, TDR characterization of circuit boards, IC packages and cables, and high-speed serial digital data communications. High-performance communications applications, such as design evaluation and manufacturing test of datacom and telecom components, transceiver subassemblies, and transmission systems.

• The instruments include a user interface that runs on the Microsoft Windows 2000 operating system as a windowed application. You operate the instrument using front-panel controls with the mouse and keyboard or with the touch screen.
• Industry-leading waveform acquisition and measurement rate, with Sample, Envelope, and Average acquisition modes.
• Support for up to six sampling modules (two large and four small modules). Up to eight inputs can be active at a time.
• Supports integrated optical and/or electrical signal pick-off and clock recovery, enabling accurate triggering on optical and/or electrical communication-signals.
  Support for optical modules with several integrated, selectable reference receivers, which eliminates the need for a multitude of add-on reference receivers.
• Full programmability, with an extensive GPIB-command set and a message-based interface.
• True differential TDR, with fast step (15 psec reflected risetime) when used with a TDR-capable 80E10 sampling module.
• Industry-leading trigger bandwidth (12+ GHz) when using the built-in-prescaler.
• Support of both telecom (SONET and SDH) and datacom (Fibre Channel, Infiniband, and Gigabit Ethernet) optical communication standards.
• Powerful built-in measurement capability, including histograms, mask testing, and automatic measurements.
• Automatic measurements operate on Pulses, RZ eye patterns, and NRZ eye patterns.
• DC to 65 GHz optical bandwidth; DC to 70+ GHz electrical bandwidth, with up to 12.5 GHz triggering.
• Low jitter (200 fs typical) in phase reference modes with the 82A04 Phase Reference module.
• FrameScan acquisition for isolating data-dependent failures during conformance/performance testing and for examining very low-level repetitive signals.
• Pattern (frame) triggering with the 80A06 PatternSync Trigger module.
• Jitter analysis with the 80SJNB Advanced Jitter, Noise and BER Analysis Software for the TDS/CSA8000 Series Sampling Oscilloscopes application (requires software key).
• Improved acquisition throughput and timing accuracy using the PatternSync Trigger module in conjunction with FrameScan.
• Support for optical conformance testing of SONET/SDH signals (including the various forward error correction rates for these telecom rates) from 155 Mbps to 43 Gb/s, FibreChannel signals, and 1, 2, and 10 Gigabit Ethernet signals as well as 2.5 Gb/s Infiniband signals.
• High precision time base with two modes of operation, locked and short-term jitter-optimized.
• Negligible long-term jitter degradation (<0.1 ppm), which substantially improves the ability to view signals that are delayed far from the trigger point without distortion.
• Improved short-term and long-term trigger jitter.
• A gated trigger option (Option GT) that lets you disable or enable (gate) triggering based on a TTL signal you connect to the instrument rear panel. This Option allows you to use recirculating buffers as part of your test setup to simulate the effects of very long optical links that are typical of undersea cables and long terrestrial links.
• Analysis and connectivity tools enable the instrument to be controlled from a variety of local and remote environments and to share data with other commercially available analysis programs.
• Predefined, built-in masks in addition to the user-defined masks.
• A large 10-inch color display that supports color grading of waveform data to show sample density.
• An intuitive UI (User Interface), with built-in online help displayable on screen.

We provide comprehensive service and maintenance for the TDS8200 Series instruments, which are essential for high-speed, precision sampling in semiconductor/computer applications and high-performance communications. Our expert services ensure that your instruments are perfectly calibrated, functionally accurate, and optimally performing to handle validation and conformance testing, impedance verification, and more.

Key Service Areas Include:

1. Software and Operating System Support:
   • We offer updates and troubleshooting for the Microsoft Windows 2000 operating system that runs the TDS8200 instruments. This includes ensuring stability and security updates are applied, optimizing the system for performance, and providing user support for navigation and operation through the windowed application interface.
2. Hardware and Module Maintenance:
   • Our technicians are skilled in servicing the up to six sampling modules the TDS8200 can support. Whether it’s the large or small modules, we ensure they are functioning correctly and are properly calibrated to maintain the instrument’s ability to activate up to eight inputs simultaneously.
3. Optical and Electrical Signal Testing:
   • We provide precise adjustments and repairs for the integrated optical and electrical signal pick-off and clock recovery systems, crucial for accurate triggering on communication signals. Our services include calibration and verification of the optical modules with integrated selectable reference receivers, eliminating the need for external devices.
4. Programming and Customization:
   • Full programmability using GPIB commands and a message-based interface allows for extensive customization. We assist in setting up and programming the instrument to meet specific testing protocols and ensure smooth operation of the true differential TDR capabilities with the 80E10 sampling module for fast step and industry-leading trigger bandwidths.
5. Measurement and Analysis Tools:
   • Our service extends to the advanced measurement capabilities of the TDS8200, including histograms, mask testing, and automatic measurements. We ensure the software components like the 80SJNB Advanced Jitter, Noise, and BER Analysis Software and FrameScan acquisition settings are correctly configured and fully operational.
6. Jitter Analysis and Time Base Accuracy:
   • We specialize in minimizing jitter through the 82A04 Phase Reference module and ensure the high precision time base is accurately locked. Our services include enhancing both short-term and long-term trigger jitter performance to maintain signal integrity.
7. Triggering and Pattern Analysis:
   • Support for advanced triggering options such as pattern (frame) triggering and gated triggering is crucial for complex setups. We assist in integrating and optimizing the PatternSync Trigger module and other advanced triggering options to accommodate specific test setups like simulating long optical links.
8. Optical Conformance Testing:
   • We offer detailed support and calibration for optical conformance testing across various standards such as SONET/SDH, Fibre Channel, and Ethernet, ensuring your instrument meets all required telecommunications and data communications standards.
9. Connectivity and Data Sharing:
   • Our services ensure that the TDS8200 is capable of interfacing efficiently with local and remote systems for data analysis. We facilitate the integration with commercially available analysis programs and support data sharing capabilities.
10. User Interface and Display Maintenance:
    • We ensure that the 10-inch color display is in excellent condition, supporting color grading and providing clear, detailed visualizations of waveform data. The intuitive user interface is maintained for optimal user experience, including updates to built-in online help systems.

We offer fast domestic and international shipping. We can ship on your FedEx, UPS, or DHL account upon request.  Lead time is typically 1-3 business days. Overseas customers, please consider duty’s and taxes before purchasing

We accept PayPal, Credit Cards, Wire Transfers, Checks, and NET Terms (select and approved customers only).